Sony XDP-PK1000 Manual De Instrucciones página 14

Tip
• The suction cup may contain tiny holes.
This can occasionally occur in the
production process, and should not cause a
malfunction.
5
Turn the LOCK/RELEASE lever
counterclockwise 90 degrees to secure
the cradle on the dashboard.
Note
• Before turning the LOCK/RELEASE lever,
make sure that you have pressed the PUSH
button hard and expelled the air from under
the suction cup.
6
Connect the cradle cable.
Rotate the arm of the cradle to the
horizontal position, and connect the
cradle cable.
Notes
• Make sure that the  marks on the
connector are visible, as shown in the
illustration, when connecting the cradle
cable.
• Do not use any cable other than the supplied
cradle cable.
14
7
Adjust the strap.
Adjust the strap by using the adjuster.
Insert the cord
To remove the cradle
1
Press the ridges to remove the cradle cable
from the cradle.
2
Loosen the strap from the adjuster.
3
Take the hoop of the strap off from the
cradle.
4
Turn the LOCK/RELEASE lever clockwise
by 90 degrees.
Adjuster