Publicidad
ENGLISH
This kit will allow you to operate simultaneously the iris diaphragm and the dowser
on any model of the LDR Canto range (Canto 250msd excluded).
Check contents
The kit you have received includes:
1 x control rod
1 x iris diaphragm rail
all complete with mounting screws.
Should one or more components miss, we kindly ask your to contact your dealer
immediately.
What you need to install the kit
A Phillip screw‐driver for M3 and M4 screws
How to install the kit
1. Remove the handle from the lever of the iris diaphragm (C) without extracting
it from the followspot
2. Remove the hook from one side of iris rail (B) by slackening the two screws
3. Position the rail on spacers D, as in drawing, and fix it in place by re‐mounting
the hook
4. Connect the lever of the iris (C) to the sliding plate of the control rod (chrome‐
plated end) using the provided screws
5. Remove the handle from the dowser (E)
6. Connect the lever of the dowser (E) to the fix plate of the control rod (black
end) using the provided screws
Your kit is now ready to be operated.
Luci della Ribalta srl, Via Berna 14, z.i. Bosco dell'Irta, 46042 Castel Goffredo MN, Italy
Tel.+39 0376 771 777 – fax +39 0376 772 140 – email infodr.it – web www.ldr.it
(A)
(B)
1
Publicidad
