Premium PM10080M Manual De Uso Y Cuidado página 27

.
13 PIZZA
a) Press " PIZZA " repeatedly until the number you wish appears in the
display, "4.0","8.0","14.0" oz will display in order.
For example, press "PIZZA" once , "4.0" appears.
START/ +30 SEC.
b) Press "
sounds five times and then turn back to waiting state.
14. MEMORY FUNCTION
MEMORY
(1) Press "
(2) If the procedure has been set, press "
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
turn back to the waiting states.If press "
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "
TIME COOK
b.Press "
POWER
c. Press "
START/ +30 SEC.
d. Press "
waiting states. If you press "
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press "
screen displays "2", then press "
15. Multi-stage cooking
At most 2 stages can be set for cooking. In multi-stage cooking, if one stage is
defrosting, then defrosting shall be placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes. The cooking steps are as following:
TIME COOK
(1) Press "
POWER
(2) Press "
TIME COOK
(3) Press "
POWER
(4) Press "
START/ +30 SEC.
(5) Press "
" to cook, buzzer sounds once.When cooking finish,buzzer
" to choose memory 1-3 procedure. The LED will display 1,2,3.
START/ +30 SEC.
MEMORY
" twice,stop pressing until the screen displays "2".
" once,then press "3","2","0" in order.
" once,"PL10" display,then press "8" and "PL8" displays.
" to save the setting. Buzzer sounds once then turn back to
START/ +30 SEC.
START/ +30 SEC.
" once,then press "5","0","0" to set the cooking time;
" once,then press "8" to select 80% microwave power
" once,then press "1","0","0","0" to set the cooking time;
" once,then press "6" to select 60% microwave power
" to start cooking.
START/ +30 SEC.
" to use it. If not, continue to
" once to save the procedure and
START/ +30 SEC.
" again, the procedure will be saved as the
" to run.
25
" again,it will start cooking.
MEMORY
" twice,
.
.