Premium PM11075 Manual De Uso Y Cuidado página 11

Example: to cook the food with 50% microwave power for 15 minutes.
a. Press "
b.Press "1","5","0","0" in order.
c.Press "
/
d.Press "
Note:1) In the process of setting, if the "
no operation within 1 minute, the oven will go back to the former setting automatically.
2) If "PL0" selected, the oven will work with fan for no power.
3) During microwave cooking, "
After pressing "
button to change the power. The oven will work with the selected power for the rest time.
5. Speedy Cooking
(1) In waiting state, instant cooking at 100% power level can be started by select a cooking
time from 1 to 6 minutes by pressing number pads1 to 6. Press "
increase the cooking time; the maximum cooking time is 99 minutes and 99 seconds.
(2) In waiting state, instant cooking at 100% power level with 30 seconds' cooking time can
be started by pressing "
cooking time by 30 seconds. the maximum cooking time is 99 minutes and 99 seconds.
Note: during microwave cooking and time defrost,time can be added by pressing
/
"
6. Weight Defrost Function
(1) Press "
(2) Press numerical buttons to input weight to be defrosted.
Input the weight ranged between 4~100 Oz.
(3) If the weight input is not within 4~100, the input will be invalid. A "beep" will be sound
and the unit will not work until valid numbers are input .
/
(4) Press "
displayed.
7. Time Defrost Function
(1) Press "
(2) Press number pads to input defrosting time. The effective time range is 00:01~99:99
(3) The default microwave power is power level 3. If you want to change the power level,
press "
of the power level you wanted.
/
(4) Press "
displayed.
" once."00:00" displays.
"once,then press "5" to select 50% microwave power.
" to start cooking.
", the current power light for 3 seconds, now you can press number
/
" button.
" to start defrosting and the cooking time remained will be
" once, and the LED will display "PL 3", then press the number pad
" to start defrosting. The remained cooking time will be
/
" button is pressed or if there is
"can be pressed to change the power you need.
". Each press on the same button will increase
", LED will display "dEF1".
", LED will display "dEF2".
EN-11
/
" to