Yamabiko MTA-AHS-HD Manual De Instrucciones página 14

Before you start
Cutter assembly position
Shoulder strap
The cutter assembly can be adjusted to ten different positions
ranging from 135° to 270° from the outer tube as shown. Al-
ways make sure the lock latch is securely locked after each
adjustment.
1. Hook the strap hook to the hanger on the outer tube.
2. Wear the shoulder strap so that the hook stays at your right
hand side.
3. Adjust the length of the shoulder strap so that you can hold
and operate the machine comfortably.
IMPORTANT
 Make sure all hooks and adjustment devices are secure.
 The shoulder harness is fitted with an emergency release
function. In case of emergency, pull up on the collar (A) to dis-
connect the machine from the strap.
12