What Is Included In The Box; Time Setup - Sharp DR-S460 Manual Del Usuario

What is included in the box:

• 1 x Main unit
• 1 x User Manual
• 1 x Quick start guide
• 1 x Power adaptor
• 1x UK AC plug for power adapter
• 1x EU AC plug for power adapter
Panels & Controls
Front Panel
1
3
5
7
1. MODE – Press to change the modes: DAB/DAB+, FM, Bluetooth, AUX
IN.
2. STANDBY – Press this button to turn on the unit or enter standby
mode.
3. INFO/MENU – Press to view the station information, or enter main
menu setting screen.
4. ENTER – Press to confi rm your selections.
PREVIOUS ◄ – Press to go back to the previous selections, or to
5.
decrease the frequency, or seek the previous strongest station.
NEXT ► – Press to go forward to the next selection, or to increase the
6.
frequency, or seek the next strongest station.
7. SCAN – Use to scan the radio stations, or to adjust the backlight level.
8. PRESET – Press to recall the preset stations.
9. DISPLAY SCREEN – To show the information.
Rear Panel
11
12
10. Volume Knob – Rotate the volume knob to adjust the volume level.
11. FM Antenna – To receive the FM signal.
12. DC Power input – DC 12V
13. AUX IN jack – Connect the 3.5mm audio cable to this jack to enjoy the
external audio music.
General Operating Instructions
Mains Adaptor (supplied with the package)
Connect the mains adaptor to the DC power socket on the rear panel of
the radio.
Get the Best Reception
Extend the telescopic aerial as far as it can go.
Turn On the Radio
Press the STANDBY button to turn on the radio.
Switch to Standby Mode
When in use, long press the STANDBY button to enter Standby mode.
Press it again to wake up the radio. The radio will turn into standby mode
automatically if no any operations after 15 minutes.
Adjust the Volume
9
Rotate the Volume Knob to adjust the volume to a comfortable level.
Listening to the radio at a high volume levels may damage your hearing.
2
Avoid listening at high volume levels for long periods of time.
4
The fi rst time the radio is used
The fi rst time you turn the radio on it will automatically scan for stations.
6
During scanning, the screen will display a slide bar that indicates the
8
progress of the scan and the amount of radio stations that have been
found so far. Once the scan has fi nished, the radio will play the fi rst station
it fi nds.
Snooze function
When the alarm is sounding in Standby mode, rotate the Volume Knob to
activate the SNOOZE function.
The alarm will sound again after 5 minutes.
Sleep Time
To set the sleep time, repeatedly press the SLEEP button to select from: off ,
15, 30, 45, 60, 90 minutes.
When the set time has passed, the unit will enter sleep mode.
Select Modes
When in use, press the MODE button repeatedly to switch to your desired
mode: DAB/DAB+, FM, Bluetooth AUX IN.
Station Information
Press the INFO/MENU button to check the station information.
Time Auto Update
The time and date can be updated automatically if the system detects the
RDS signal. If the RDS signal is weak or cannot be detected, the time will
not automatically update.
Main Menu Setting
10
Long press the INFO/MENU button to enter the main menu setup screen.
Find and enter the <System> screen by pressing the ENTER button.
Then use the ◄/► button to cycle through the menu options: <Time
setup>, <Alarms>, <Sleep>, <Language>, <Prune>, <Station Order>,
13
<Backlight>, <Factory reset>, <SW version>.
NOTE: The <Prune> and < Station Order> are only available in DAB mode.
Select one of the options and then press the ENTER button to access that
menu.

Time setup

1. Set clock: 00:00(Hour:Minutes), use the ◄/► and ENTER buttons to
set.
2. Set date: 01-01-2018(Day-Month-Year), same as the "set clock" setting.
3. Auto update: <No update> or <From radio>, press ENTER button to
confi rm.
4. Set 12/24 hour: choose your favorite format.
EN