Product Use; Troubleshooting; Reciclying And Disposing; Guarantee - Greencut MNA300 Manual De Instrucciones

PRODUCT USE

1. Pull the hose, it has a function of position lock.
2. Don't pull the hose when it has finished unwinding.
3. Hold the nozzle when the hose is retraced until your task is finished.

TROUBLESHOOTING

The most common malfunction is that the hose cannot be retracted automatically after fully extending the hose. The
reason may be that the hose end is locked as the 'stop-anywhere' mechanism stays in the locking point, and there is
no extra hose to be pulled out for release.
There are two ways to solve this:
1. Hold the hose at the yellow warning mark and pull with a jerking motion until the hose retracts.
2. Place the reel down on its right side, then pull on the hose until it retracts.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual bin. Help us protect the
environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly way. Do not throw it away with the household rubbish. Its
plastic and metal components can be separated and recycled. Take this device to an approved recycling centre (green
point).
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all products for a period of 2 years (valid for Europe). This guarantee is subject to the purchasing
date and taking into consideration the purpose of use of the product.
In order to claim your guarantee, you must present your receipt of purchase and its description, as well as the defective
product.
The guarantee does not cover normal wear and tear, especially due to failure to comply with the operating and
maintenance instructions.
In the event that repairs or modifications have been made by the consumer or any other than with the original
GREENCUT spare parts, the guarantee will be voided.
In the event of a justified guarantee claim, we are authorised, at our discretion, to repair or replace the defective tool
free of charge. Claims beyond those described in this guarantee will be invalid.
21
EN