Sunstech TAB97QC Manual De Usuario página 15

Recovery Mode:
How to enter in recovery mode.
Please follow these steps.
1-To enter in the recovery mode first you should power off the device,
2-Then long-press the "ON-OFF" key and "Return" Key at the same time until
the Recovery mode has appeared, pls try it.
3-After a new menu will appear and then you must use the touch panel to
select "Wipe data/ factory reset" then press "Power" and then select "Yes
delete all user data"
Then press "power" again. The unit will then begin the recovery mode.(this
process may last for a few minutes).
4-When it finishes select "reboot system now" press the "power button" and
the unit will re-start itself. (this process may last for a few minutes)
How to download the software using the unit.
IMPORTANT: When you download the software, all data will be
deleted as photos, videos and Apps that you have been installed.
Do not interrupt this process please make sure the battery is fully charged.
Please, follow these steps.
1- Open browser and search and open this link:
www.sunstech.es/donwload/
2- Select the model of the tablet that you have and download the
software.(This software is installed In the INTERNAL SD).
3- When it finished the download, select the App " Update " in your unit.
4-Select "Local Update", "Download".
5-Select the software / download and wait until the process is finished.
13