Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If your line trimmer does not seem to operate properly,
first consult the Troubleshooting
Table below.
If the solution to your trimmer problem
is not found in
the Troubleshooting
information,
take the trimmer to
a qualified service dealer for inspection
and possible
repair.
_
WARNING!
and unplug.
Before proceeding,
switch off
PROBLEM
POSSIBLE
CAUSE
SOLUTION
1. Lines have become stuck
together due to heat or
1. Unplug trimmer. Open spool cover. Remove
storage time.
spool. Unwind line and then rewind onto spool.
Lines will not feed when
2. Not enough line present in
2. Unplug trimmer. Open spool cover. Remove spool
used as per instructions,
spool,
and replace with new tine or new spool assembly as
9er instructions
in this manual.
3. Unplug trimmer. Open spool cover. Remove
3. Lines are tangled on spool,
spool. Unwind and remove tangled line. Rewind line
as per instructions
in this manual.
Grass wraps around
1. Cutting tall grass at ground
1. Cut tall grass from the top down to prevent
drive shaft housing and
level,
wrapping.
line head.
1. Power cord is not plugged
1. Plug in the power cord.
in or connection
is loose.
Motor fails to start
2. Household
circuit breaker
when switch trigger is
is tripped.
2. Check circuit breaker.
depressed.
3. Extension cord may be
3. Try another extension
cord or connect into
faulty,
another wall receptacle
socket on a different circuit.
12 -- English
Publicidad
Tabla de contenido
