Publicidad
Tools Required for Grill Module Installation:
Safety Goggles
Ear Protection
Dust Mask
Gloves
Shovels (Digging & Flat)
Metal Cutters (For banding on cubes)
Mason Hammer (Chipping & Hammer)
Road Stone Rake
Tamper (Hand or Mechanical)
Wheelbarrow
Level (2' and 6' recommended)
Speed Square
Caulk Gun 10 oz or 28 oz (depends on what size
adhesive is purchased)
Rubber Mallet
14" Demo saw with diamond blade
Tape Measure
Marking Device (pencil, soap stone, etc)
Chalk Line
Hand Broom
Concrete Tools (Trowel/Floats)
Drill & 1/16" bit
5/16" Nut Driver
7 ¼" Circular saw with wood blade
4" Electric grinder
4" Diamond cup grinder
4 Carpenter clamps
Items Included In The Kit:
1 - Reinforced concrete lintel 48" x 4" x 8"
3 - Plastic shim pack sheet for leveling lintels or
block as needed
1 - Cube of Cambridge Ledgestone Wall
1 - Cube of Ledgestone corners
1 - Set of Appliances
1 - Granite Countertop
1 - Installation manual for Concrete Pad,
Ledgestone Wall, Granite and Appliances
Cambridge Pre-Packaged / Pre-Cut
Ledgestone Wall Grill Module
2
Material Required:
¾" clean stone (approx. 1/2 ton)
Concrete (approx. 13 - 80 lb bags)
Cambridge concrete adhesive (approx. 3-29 oz.
or 8-10.3 oz. tubes)
(4 pcs) 2" x 4" x 8' lumber
2 ½" wood screws
½" rebar (approx. 20')
Silicone for granite
2011
Publicidad
