SPX Radiodetection Pearpoint flexiprobe P340 Serie Guia Del Usuario página 3

SAFETY WARNINGS
The system is not earthed. If mains operated equipment is connected to
the system then the external equipment must be earthed in accordance
with the manufacturer's instructions. Failure to comply with this may
cause the unit to become live and be a lethal hazard.
DO NOT USE the P340 flexiprobe system in potentially explosive
environments. This equipment is NOT approved for use in hazardous
Locations.
Pushrod reels are heavy. Use the wheels (P342 and P343 models) to assist
transport. Observe heavy-lifting safety practices when lifting the reel.
Foul water systems can be a source of biological hazards. Wear
appropriate protection when handling the P340 controller and the
pushrod reel and camera.
The camera will get hot during use. This is normal. Exercise care when
handling the camera at all times.
The mains power and charging cables are not waterproof and should
only be used in dry environments / indoors. The controller contains an
internal battery for IP53-rated weatherproof operation.
Always use the rod brake to prevent the rod causing damage or injury.
Read the full operation manual for full instructions, available on the CD
and our website.
P340+ controller, with internal
battery power, illustrated
5
3
6
7
4
1
8
2
9
1
4
P340 Controller
1 On/Off Switch.
2 Keypad and function keys: Allows the operator to select functions
and edit text entries.
3 Keyboard: Provides enhanced text entry capabilities and short-cuts
to access system functions.
4 Display: LCD screen shows image and various on-screen information
such as deployed rod length, operator generated titles, time and date.
5 Link Cable Socket (at rear of unit): Connector for the link cable.
6 Fuse Holder: 5mm x 20mm T3.15A 250V cartridge fuse.
7 RCA Video Jacks: Allows an external composite video source to be
displayed by the P340 controller or recorded onto Compact Flash.
P340 video can also be displayed or recorded on an external device.
8 Power Socket: DC power input from vehicle supply, battery box or
mains adapter.
9 Compact Flash slot: Compact Flash for video recording and later
playback on the controller or PC. Also used for software upgrades
and storing diagnostic log files.
10 Keyboard Socket: Keyboard connector.
11 Audio Socket: Connection for headset using standard 2.5mm
connector.
12 PC socket: Type B USB connection allows file transfers for PC.
13 USB socket: Type A USB connection for USB flash drives. Memory Sticks
11
can be used for video recording and later playback on the controller or
PC. Also used for software upgrades and storing diagnostic log files.
14 Internal battery power connector and charging plug (P340+ only).
13
15 Battery Status Indicator (P340+ only). When the Battery Status Check
14
Button, 16, is pressed, this will display remaining charge. From red lights
only (low charge), to all lights (fully charged).
12
16 Battery Status Check Button (P340+ only).
10
15
16
5