Cleaning And Maintenance; Technical Information - ECG FS 40 Manual De Instrucciones

GB

CLEANING AND MAINTENANCE

1. Unplug the cord from the outlet prior to cleaning the fan!
2. Use a soft dry towel to clean. Do not use solvents or other chemical agents.
3. Refer to the fan assembly scheme for dismantling the appliance.
4. Make sure no liquid can enter the motor.
We recommend keeping the package for transporting the fan or storage.

TECHNICAL INFORMATION

Diameter 40 cm
Nominal voltage: 230 V~ 50 Hz
Nominal input power: 50 W
Noise level: 67 dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
20
DECORATIVE COVER ASSEMBLY
ON THE BACK SIDE OF THE COVER, YOU WILL FIND 3 SCREWS,
6 WASHERS AND 3 HOLES TO ATTACH.
PLACE THE COVER INTO THE MIDDLE OF THE SCREEN.
USE A PHILLIPS SCREWDRIVER AND TIGHTEN THE SCREWS.
08/05