Using The Appliance - Essentiel W1 Instrucciones De Uso

installation
Before connecting the webcam to your computer, make sure
that you do not have any other webcam already installed on your
system.
The mount allows you to install the webcam on various items such
as those indicated below.
Place the webcam's mount on a flat
1.
surface, as indicated in Figure 1.
Fig. 1
You can also unfold the mount to attach
2.
the webcam to the screen of your laptop
or your desktop computer's flat screen, as
indicated in Figure 2.
Fig. 2
Connect the webcam's USB cable to one of your computer's free
3.
ports.
After a few seconds, an information bubble stating: New device
4.
detected appears on the bottom right of your screen.
The webcam is ready for use.
5.
12

using the appliance

The webcam is detected automatically when you activate a
•
video conference app.
When the webcam is in operation, the LED located to the left
•
turns blue.
Make sure that it is not placed against the light to prevent
•
having too light an image.
Turn the webcam towards yourself.
•
To adjust the clarity of the display, turn the webcam's focus
•
ring until you reach the clearest image possible.
To use the built-in microphone, you need to select USB audio
•
input in the settings of the app you are using.
If your computer doesn't automatically detect the webcam,
•
connect it to another available USB port. If the problem
persists, restart your computer. In most cases, this allows the
device to be recognised.
Windows
In Windows 10, the pre-installed Camera app allows you to take
photos and videos.
In the Start menu, select the Camera app.
Then select the camera icon to allow for the taking of photos or the
video icon to take a video.
To use the webcam with other applications, you need to change
privacy settings:
In the Start menu, select Settings, and then Privacy > Camera.
•
Activate the option "Allow apps to access your camera".
•
Then activate the apps with which you would like to use the
•
webcam.
13