EGAmaster MASTEREX 79732 Manual De Instrucciones página 6

ENGLISH
• Please read this instruction before any use, maintenance and service of explosion-proof
lights.
• The explosion-proof light must be used by a certain professional training person.
• Must use the replacement parts which produced or appointed by the manufacturer for
maintenance.
Make sure the maintenance and service are not in a dangerous place and fulfilled by
professional trained person. Using the parts which not manufactured by the manufacturer.
Will destroy the explosion-proof performance of the explosion-proof lights.
• The explosion-proof lights should comply with the relevant laws and regulations of the
European Union.
WARNING!
• Only open in non-dangerous location!
WARNING!
Battery Pack:
• Only use the power pack from the manufacturer.
Input Voltage: AC100~240V/50-60Hz, Input Current: 0.4A, Output Voltage:DC25V~33V,
Output Current: 0.63A.
IEC 60079-0:2011 Explosive atmospheres, Par0: Equipment General requirements
IEC 60079-1:2014 Explosive atmospheres, Par1: Equipment protection by flameproof
enclosures "d"
IEC 60079-7:2015 Explosive atmospheres, Par7: Equipment protection by increased safety "e"
IEC 60079-18:2014 Explosive atmospheres, Par18: Equipment protection by type of
protection "m"
IEC 60079-11:2011 Explosive atmospheres, Par11: Equipment protection by intrinsic safety "i"
IEC60079-28:2014 Explosive atmospheres, Par28: protection of equipment and transmission
systems using optical radiation
IEC60079-31:2013 Explosive atmospheres, Par31: Equipment dust ignition protection by
enclosure"t"
IEC 60529:2001 Degrees of protection provided by enclosure (IP code).
6
IMPORTANT REMINDERS
1. STANDARD