Casselin CSC4 Manual De Instrucciones página 17

Insert the dowels into the holes. EN
- Screw the plastic part which clips to the hair dryer support in the wall using one of the screws provided
in the top hole.
- Then take the larger screw and screw it into the wall through the hole in the hand dryer support at the
bottom right. Secure the hair dryer support then cover the hole with the available plastic cover.
- Plug in the appliance and take the user handle.
- Take the drying nozzle, the LCD screen displays the status of the operation, the temperature and the
time. The default temperature is 60 ° C, adjust the temperature using the keys below the screen (from 40 °
C to 80 ° C)
- Replace the drying nozzle after use, the shutdown is automatic.
- Test it several times to verify the correct functioning of the device.
- The installation of the hair dryer without a wall outlet must be carried out by a qualified professional who
bears full responsibility.
- The installation of the hair dryer in a drawer is prohibited
WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
NOTE
The device is fitted with a safety system in the event of overheating. If tripped, unplug the device and allow it
to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.