Clay Paky ALPHA WASH 1500 LT Manual De Instrucciones página 24

NOTE: On conclusion of resetting in case of absence of DMX signal, Pan & Tilt move to the "Home" position (Pan 50% - Tilt 50%) all the others channels stay at 0%.
• COLOUR MIXING - channel 1 - 2 - 3
Operation with option color mixing: RGB
CHANNEL 1 CHANNEL 2 CHANNEL 3
CYAN MAGENTA YELLOW
IMPORTANT: The lamp dim to half power 1 second after all the 3 channels stay at 0%
level. The lamp goes back to full power when the channels level is put higher than 0%.
Operation with option color mixing: CMY
CHANNEL 1 CHANNEL 2 CHANNEL 3
CYAN MAGENTA YELLOW
IMPORTANT: The lamp dim to half power 1 second after all the 3 channels stay at 0%
level. The lamp goes back to full power when the channels level is put higher than 0%.
• C.T.O. - channel 4
CHANNEL 4
CTO
• COLOUR WHEEL - channel 5
ALPHA WASH 1500 LT
BIT % EFFECT
255 100 COLOUR EXCLUDED
0 0.0 COLOUR INSERTED
BIT % EFFECT
255 100 COLOUR INSERTED
0 0.0 COLOUR EXCLUDED
BIT % EFFECT
FILTER INSERTED
255 100
0 0.0 FILTER EXCLUDED
BIT % EFFECT
FAST ROTATION 160 rpm
255 100
128 50.0
SLOW ROTATION 0.2rpm
117 46.0 BLUE
97 38.0 ORANGE
77 30.0 AQUAMARINE
58 23.0 GREEN
39 15.0 CTO 3200
RED
20 8.0
0 0.0 WHITE
• STOP / STROBE - channel 6
IMPORTANT: The lamp dim to half power 1 seconds after the channel stay at 0%
level. The lamp goes back to full power when the channel level is put higher than 0%.
• DIMMER - channel 7
The lamp is linearly dimmed from full power to half power electronicaly and
mechanically from half power to off.
• DIMMER FINE - channel 8
24
BIT % EFFECT
252 - 255 98.7 - 100 OPEN
239 - 251 93.7 - 98.2 RANDOM FAST STROBE
226 - 238 88.7 - 93.2 RANDOM MEDIUM STROBE
213 - 225 83.7 - 88.2 RANDOM SLOW STROBE
208 - 212 81.7 - 83.2 OPEN
207 81.2 FAST PULSATION
108 42.5 SLOW PULSATION
104 - 107 41.0 - 42.0 OPEN
103 40.5 FAST STROBE (12 flash/sec)
4 1.7 SLOW STROBE (1 flash/sec)
CLOSED
0 - 3 0.0 - 1.2
BIT % EFFECT
255 100
0 0.0
BIT % EFFECT
255 100
0 0.0