Ce Declaration Of Conformity - Facom V.C75F Manual Original

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
NEVER USE THE ANGLE CUT-OFF TOOL WITHOUT THE SAFETY GUARD
Model Deburring Motor power
wheel
mm
V.C75F Ø 75
Model Rated speed
rpm
V.C75F 20000
* k = measurement uncertainty in dB ** k = measurement uncertainty in m/s²
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT V.C75F
– FACOM Ø 75 MM ANGLE CUT-OFF TOOL
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-7: 2012
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
NU-V.C75F_0616.indd 8
Center hole max. wheel wide
rating diameter
kW mm mm
0,5 max. 10 max. 3
Air Working pressure
consumption
l/min bar
113 6,2

CE DECLARATION OF CONFORMITY

EMERGENCY
GATE VALVE
10 mm ?
Ø 22,23 mm
Noise level
Pressure dB(A) Power dB(A)
k* k*
79 3 90 3
Weight Dimensions
kg mm
0,86 203 x 85x 84
Markus Rompel
20.03.2016
Director Engineering
Vibrations level
m/s
2
Pressure dB(C)
k* k**
130 3 1,6 0,96
23/06/2016 11:34:14