Setting The Timer; Switching Off The Timer - BORETTI B410 Manual De Instrucciones

SETTING THE STRENGTH
The coffee machine makes an average strength coffee by default. If you wish to have stronger
coffee, you can select the 'set strength' function. The water runs through more slowly, so that
all the flavours are there. So your coffee develops its full flavour. Press the 'set strength'
button, then the start/stop button
you will hear 3 beeps, the indicator lights of the buttons will turn off and the appliance will go
into keep warm mode.

SETTING THE TIMER

1. First set the time (see 'setting the time').
2. Press the 'set timer'
set. The clock has a 12-hour time indication. AM means before noon, and PM means after
noon.
3. Enter the time you want the appliance to start making coffee. This is done with the
'hours'
display will return to the clock.
4. Once you have set the desired time, press on the 'start timer'
light of the 'set timer'
The timer has now been set.
5. The display returns to the clock.

Switching off the timer

To erase the time set and to switch off the timer, press the 'start timer'
will no longer be lit.
Checking the timer
To check the time set, press the 'start timer'
the 'set timer'
timer' button again to confirm and reactivate the timer.
38
2
1
button. The button will light up and the display will show the time
and 'minutes' buttons. If you do not enter anything within 5 seconds, the
button will go out, and the 'start timer'
button. The time selected earlier will appear on the display. Press the 'start
1
. Both buttons will light up. When the coffee is ready,
2 3 4
button. The button will no longer be lit. Press
button. The indicator
light will light up.
button The button
B410 - B411 - B412