Brentwood Appliances TS-361BK Instrucciones De Operación Y Seguridad página 4

Parts:
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
WARNING:
 Before plugging in, check to see that the electric circuit is not overloaded
with other appliances. This unit should always be operated on a separate
120Volt AC outlet.
 Be certain that your unit is resting on a leveled flat countertop. Avoid using
pans that are unstable and easily tipped.
Using Your Electric Burner or Hot Plate:
WARNING: Avoid contact with moving parts.
1. Place pan on heating element.
2. Turn control knob from the "OFF" position to the desired temperature
position of "LOW", "MED" or "HIGH"
3. The heating element will energize and heating will begin immediately.
CAUTION: The whole burner, except the control knob, will become hot. Do
not touch while in use.
4. When cooking is complete, turn control knob back to "OFF" position.
TIP: If the burner is not to be in use for a long period of time, it is highly
recommended to unplug the unit from the outlet. This prevents any accidental
burns or injury.
Cleaning Your Electric Burner or Hot Plate:
WARNING: Always unplug the product and allow it to cool before cleaning or
storing it.
NOTICE: Never immerse burner, plug or cord in water or any other liquid.
 Use a damp towel or sponge to clean the surface of burner, the burner
ring, the drip pan and the base.
 Wipe the drip pan a damp towel or sponge. Do not attempt to remove the
entire heating element.
 Never use harsh abrasives or steel wool pads on any part of the unit.
Heating Element
Adjustable Temperature Knobs
4