Matco Tools MCL18DD Instrucciones De Operación página 7

MATCO 10.8V, 14.4V, 18V, and 19.2V CORDLESS TOOL
AND CHARGER
Matco Tools warrant its 10 .8V, 14 .4V, 18V, and 19 .2V cordless
tools and chargers to be free from defects in material and
workmanship for a period of one (1) year from the original date
of purchase . Please see separate section below for warranty of
batteries .
Registration is required through your local authorized Matco
distributor and/or by submission of completed registration form
included with the product . Defective products must be returned
and analyzed by Tri-County Power Tool, Inc . or Pneutool Parts
& Services, Ltd ., at the addresses listed below, freight prepaid .
Matco Tools, at their discretion, will repair or replace any 10 .8V,
14 .4V, 18V, and 19 .2V cordless tool or charger to be found
defective in material or workmanship at no charge .
MATCO 14.4V LITHIUM-ION and 19.2V LITHIUM-ION
BATTERIES Pertaining part numbers include MUC192LB
and MUC144LB
Matco Tools warrant its 14 .4V Lithium-ion (Li-ion) and 19 .2V
Li-ion batteries to be free from defects in material and
workmanship for a period of one (1) year from the original
date of purchase or 1,000 charges, whichever occurs first .
Registration is required through your local authorized Matco
distributor and/or by submission of completed registration form
included with the product .
If the battery should fail within the warranty period, it must
be returned and analyzed by Tri-County Power Tool, Inc . or
Pneutool Parts & Services, Ltd ., at the addresses listed below,
freight prepaid . Battery capacity defect is only defined as the
maximum battery capacity at less than 50% of manufacturer's
rated capacity within the warranty period, and only as
determined by Matco Tools . Based on the evaluation, Matco
Tools, at their discretion, will either repair or replace any
batteries to be found defective in material or workmanship at
no charge .
IMPORTANT
To determine eligibility for capacity-related warranty
considerations of the 14 .4V Li-ion and 19 .2V Li-ion batteries
during the warranty period, please follow these guidelines: after
completely charging the battery, remove the battery from the
charger and depress the analyzer button on the front panel .
Your battery will be eligible for warranty considerations if:
- One or two green indicator lights on the panel illuminate
and the left-most indicator light is not amber
Your battery will NOT be eligible for warranty considerations if:
- The left-most indicator light on the panel turns amber,
which denotes that your battery has been charged over 1,000
times
- Three or more indicator lights illuminate on the panel,
which denotes that your battery has more than 50% of
manufacturer's rated capacity
- The date of the warranty claim falls outside of one year
from the original date of purchase
Please see Matco Battery Care Guide for helpful tips that may
maximize the useful life of your battery .
MCL18DD
MCL18DD 18V 1/2" Drill Driver
MATCO CORDLESS WARRANTY
7
MATCO 14.4V LITHIUM-ION and 18V LITHIUM-ION
BATTERIES Pertaining part numbers include MCL144LB
and MCL18LB
Matco Tools warrant its 14 .4V Lithium-ion (Li-ion) and 18V
Li-ion batteries to be free from defects in material and
workmanship for a period of one (1) year from the original
date of purchase . Registration is required through your local
authorized Matco distributor and/or by submission of completed
registration form included with the product .
If the battery should fail within the warranty period, it must
be returned and analyzed by Tri-County Power Tool, Inc . or
Pneutool Parts & Services, Ltd ., at the addresses listed below,
freight prepaid . Battery capacity defect is only defined as the
maximum battery capacity at less than 50% of manufacturer's
rated capacity within the warranty period, and only as
determined by Matco Tools .
Matco Tools warrant its 14 .4V Lithium-ion (Li-ion) and 18V
Li-ion batteries to be free from defects in material and
workmanship for a period of one (1) year from the original
date of purchase . Registration is required through your local
authorized Matco distributor and/or by submission of completed
registration form included with the product .
Based on the evaluation, Matco Tools, at their discretion, will
either repair or replace any batteries to be found defective in
material or workmanship at no charge .
MATCO 10.8V LITHIUM-ION, 14.4V NI-CD, AND 19.2V
NI-CD BATTERIES
Matco Tools warrant its 10 .8V Lithium-ion, 14 .4V Nickel-
Cadmium (Ni-Cd), and 19 .2V Ni-Cd batteries to be free from
defects in material and workmanship for a period of one (1)
year from the original date of purchase . Registration is required
through your local authorized Matco distributor and/or by
submission of completed registration form included with the
product .
If the battery should fail within the warranty period, it must
be returned and analyzed by Tri-County Power Tool, Inc . or
Pneutool Parts & Services, Ltd ., at the addresses listed below,
freight prepaid . Battery capacity defect is only defined as the
maximum battery capacity at less than 50% of manufacturer's
rated capacity within the warranty period, and only as
determined by Matco Tools . Based on the evaluation, Matco
Tools, at their discretion, will either repair or replace any
batteries to be found defective in material or workmanship at
no charge .
Please see Matco Battery Care Guide for helpful tips that may
maximize the useful life of your battery .
12/09/09