Glacier bay HD67731W-6A01 Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
□
Remove the pop-up stopper (J) and drain
ange (K) from the drain body (N).
N
4
J
K
5
Installing the drain body
□
Apply silicone sealant (not included) under the
drain ange (K) and place the drain ange (K)
into the drain hole of the sink.
□
From underneath the sink, screw the drain
body (N) onto the drain ange (K). Ensure that
the opening (1) for the ball rod on the drain
body (N) faces towards the rear of the sink.
□
Tighten the rubber washer (L) and lock nut (M)
on the drain body (N). Hand-tighten only.
1
L
M
N
Please contact 1-855-HD-GLACIER for further assistance.
K
1
HOMEDEPOT.COM/GLACIERBAY