Tabla de contenido
Publicidad
20. For permanently installed equipment without
built-in fuses, circuit breakers or similar
protective devices, the supply circuit must be
fused in such a way that suitable protection
is provided for users and products.
21. Do not insert any objects into the openings in
the housing that are not designed for this
purpose. Never pour any liquids onto or into
the housing. This can cause short circuits
inside the product and/or electric shocks, fire
or injuries.
22. Use suitable overvoltage protection to
ensure that no overvoltage (such as that
caused by a thunderstorm) can reach the
product. Otherwise the operating personnel
will be endangered by electric shocks.
23. Rohde & Schwarz products are not protected
against penetration of liquids, unless
otherwise specified (see also safety
instruction 1.). If this is not taken into
account, there exists the danger of electric
shock for the user or damage to the product,
which can also lead to personal injury.
24. Never use the product under conditions in
which condensation has formed or can form
in or on the product, e.g. if the product was
moved from a cold to a warm environment.
25. Do not close any slots or openings on the
product, since they are necessary for
ventilation and prevent the product from
overheating. Do not place the product on soft
surfaces such as sofas or rugs or inside a
closed housing, unless this is well ventilated.
26. Do not place the product on heat-generating
devices such as radiators or fan heaters.
The temperature of the environment must
not exceed the maximum temperature
specified in the data sheet.
27. Batteries and storage batteries must not be
exposed to high temperatures or fire. Keep
batteries and storage batteries away from
children. Do not short-circuit batteries and
storage batteries.
If batteries or storage batteries are
improperly replaced, this can cause an
explosion (warning: lithium cells). Replace
the battery or storage battery only with the
matching Rohde & Schwarz type (see spare
parts list). Batteries and storage batteries
must be recycled and kept separate from
residual waste. Batteries and storage
batteries that contain lead, mercury or
cadmium are hazardous waste. Observe the
1171.0000.42-04.00
Grouped Safety Messages
28. Please be aware that in the event of a fire,
29. The product can be very heavy. Be careful
30. Do not place the product on surfaces,
31. Handles on the products are designed
32. If you use the product in a vehicle, it is the
33. If a laser product (e.g. a CD/DVD drive) is
34. Prior to cleaning, disconnect the product
national regulations regarding waste
disposal and recycling.
toxic substances (gases, liquids etc.) that
may be hazardous to your health may
escape from the product.
when moving it to avoid back or other
physical injuries.
vehicles, cabinets or tables that for reasons
of weight or stability are unsuitable for this
purpose. Always follow the manufacturer's
installation instructions when installing the
product and fastening it to objects or
structures (e.g. walls and shelves).
exclusively for personnel to hold or carry the
product. It is therefore not permissible to use
handles for fastening the product to or on
means of transport such as cranes, fork lifts,
wagons, etc. The user is responsible for
securely fastening the products to or on the
means of transport and for observing the
safety regulations of the manufacturer of the
means of transport. Noncompliance can
result in personal injury or material damage.
sole responsibility of the driver to drive the
vehicle safely. Adequately secure the
product in the vehicle to prevent injuries or
other damage in the event of an accident.
Never use the product in a moving vehicle if
doing so could distract the driver of the
vehicle. The driver is always responsible for
the safety of the vehicle. The manufacturer
assumes no responsibility for accidents or
collisions.
integrated in a Rohde & Schwarz product, do
not use any other settings or functions than
those described in the product documen-
tation. Otherwise this may be hazardous to
your health, since the laser beam can cause
irreversible damage to your eyes. Never try
to take such products apart, and never look
into the laser beam.
from the AC supply. Use a soft, non-linting
cloth to clean the product. Never use
chemical cleaning agents such as alcohol,
acetone or diluent for cellulose lacquers.
Sheet 4
Publicidad
Tabla de contenido
