Lanberg SM01-WS01 Manual De Instrucciones página 12

D. Mounting
1. Remove the product from the packaging.
2. Remove the cover of the main module.
3. Pull out the insulation sheet, device should start up in paring mode.
4. Before installing the device at the intended location, we recommend
connecting the device with the TUYA App (see section G).
5. Attach the main module with a mounting tape at the desired location (e.g., on
bathroom tile, on side of the bathroom cabinet).
6. The sensor probe should touch the floor or the surface where the leakage is
expected to be observed (e.g. floor behind a washing machine). For proper
functioning it is required that the probe's contacts are directly adjacent to the
surface on which the leakage is expected.
1
4
2
5
EN
3
6
Floor