Parts, Operation - Nesco DF-25 Manual De Instruccion

1 Lid Viewing Window
2 Lid
3 Basket and Basket Handle
4 Temperature Control
5 Oil Reservoir
6 Base
1
2
3
4
5
6
1. Read and follow all instructions and save for reference. Remove all packaging and labels.
2. Clean oil reservoir by wiping with a damp cloth or sponge and dry thoroughly.
3. Clean all parts following instructions in the 'Care and Cleaning' section.
4. Wipe the base with a damp cloth and dry completely. Never use abrasive cleaners
or scouring pads to clean parts of this appliance.
5. TO REDUCE RISK OF SHOCK HAZARD NEVER IMMERSE THE CONTROL
BOX OR CORD IN WATER OR ANY OTHER LIQUID.
6. Assemble basket handle to basket. To assemble basket handle, squeeze end of
handle together and insert between brackets on the basket.
1. Place the appliance on a flat, heat resistant and stable surface near a 120V
electrical outlet.
2. Place empty oil reservoir into the base. Add 84 oz. (2,5 L) of oil into oil reservoir.
Use quality vegetable, peanut or soy oil. Ensure the oil level is between the MIN
and MAX markings of the oil reservoir.
NEVER USE THE FRYER WITHOUT OIL. THE HEATER WILL BE DAMAGED AND
THE WARRANTY WILL BE VOIDED, IF HEATED DRY.
Parts
7 Power Light (Red)
8 Working Light (Green)
9 Control Box
10 Cord Connector Inlet
11 Safety Release Power Cord
Before first use
Operation
2
7
8
9
10
11