Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING THE 1000TL TO 110V PLUG (USE 15A 125V 3 BLADE PLUG)
1.
Connect the green lead to the ground blade
2.
Connect the black lead to the line blade (usually brass looking)
3.
Connect the white lead to the neutral blade (usually silver looking)
FLEXIBLE NECK
Note: To set the light at different positions - bend any part of the "FLEXIBLE
NECK" to move it. Never apply force to the "LAMP HEAD" to redirect the light.
The "LAMP HEAD" can be gently adjusted downward from the "standard position"
by 90 degrees and side-to-side by 180 degrees.
LAMP HEAD
(standard position)
04
Publicidad
