Bradley SN2003/IR Manual De Instalación página 7

Installation
Optional Towel Dispensers and 4-Inch Shroud
Attach Slip Ring to ceiling. Use (5)
A
1/4" screws (provided by installer), in a
6" diameter circle.
Attach Dispensers, using them as a
B
guide for positioning mounting brackets.
C
Using supplied screws, secure base
of shroud to the sprayhead cover.
D
Connect base of vent pipe to
drain as described in Step 3.
Optional Dispenser Mounting Brackets for 1-1/2" Pipe
Mount Brackets for a 1-1/2" pipe in a similar
A
manner to above. Secure brackets in position
using tie-bar supports as shown.
Bradley Corporation • 215-1073 Rev. H ; EN 10-00-015
Mounting Bracket
Soap Filler Cap
SN2003/IR, SN2023/IR
Vent Pipe (shown for
illustrative purposes)
Shroud
Pipe Cap
Mounting Bracket
Tie Bar
Spacer Sleeve
7-12-2010 7