ION BOOMBOX DELUXE Guia De Inicio Rapido página 13

Pairing a Bluetooth Device
1. Adjust the Function switch on Boombox Deluxe to the BT/USB/SD position.
2. Turn on your Bluetooth device.
3. Navigate to your Bluetooth device's setup screen, find Boombox Deluxe and connect. A voice
prompt will be heard saying "Bluetooth pairing" when pairing and "Bluetooth connected" when
connected to your Bluetooth device.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. Press and hold the Play/Pause button to disconnect from a paired Bluetooth device. A voice
prompt will be heard saying "Bluetooth disconnected" when disconnected from the Bluetooth
device.
Troubleshooting
If BoomBox Deluxe is not charging: Ensure that the Charging switch is turned on and that the
power cable is connected.
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce
the overall volume of Boombox Deluxe using the Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the
bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is poor AM reception: When you have a Bluetooth device that is connected, disconnect
your Bluetooth device in order to listen to AM radio. To adjust AM reception, move the entire unit.
If you cannot connect your audio device to Boombox Deluxe via Bluetooth:
•
Have your audio device (e.g., smartphone or tablet) and Boombox Deluxe as close together as
possible while trying to connect. Make sure both the audio device and Boombox Deluxe are
unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on Boombox Deluxe to disconnect Boombox Deluxe from any
other audio device and restart the search process. If this does not work right away, power off
Boombox Deluxe and then power it back on. See
information.
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You
can find this under the Bluetooth menu in the Settings for your phone or other audio device.
If this does not work, and you have connected to Boombox Deluxe before, find Boombox
Deluxe in the list of available or previously connected devices in your audio device's Bluetooth
menu, tap the "gear" or "i" icon located next to it and then select Unpair or Forget. Turn
Boombox Deluxe off and back on and try pairing again once it reappears in your available
devices list.
Note: If Boombox Deluxe has been paired to another audio device recently that is still within
range, you may need to repeat this process with that audio device to fully disconnect.
Pairing a Bluetooth Device for more
13