HoMedics MYCHILL PAC-20 Manual De Instrucciones E Información De Garantía página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO FILL
CAUTION: Before filling the unit with water, unplug the Power Adapter from the wall and from the unit.
NOTE: Always use two hands to carry the unit.
PERSONAL SPACE COOLER LOCATION
Place the Personal Space Cooler in the desired location prior to filling with water. The front of the unit
should be located within 4-FT of the desired personal cooling zone. We recommend placing a waterproof
pad under the unit.
1. Be sure the Cooling Media is
positioned with the "V-shaped"
vents facing upward. Never operate
the unit without the cooling media.
3. Fill the water tank with clean, cool
(not cold) water. We recommend
using distilled water if you live in
a hard water area. Never use any
additive or place essential oils into
the water. Even a few drops will
damage the unit.
2. Remove the water tank and turn the
tank upside down – remove the tank
cap by turning it counter-clockwise.
4. Replace the tank cap by turning
clockwise until tight. Do not
overtighten.
6

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido