Greencut GHT400L Manual De Instrucciones página 37

All information in this manual is relevant to your own safety and that of your environment. If you have any questions
about the information contained in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most likely situations that may arise during use of
this machine. Consult all product documentation, packaging and labels before use.
If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible
and if you see danger, do not use the machine.
USERS
• This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.
PERSONAL SAFETY
• Do not use this machine for other purposes other than those for which it has been designed.
• Do not force this machine. A correct use for the type of work to be done will allow you to work better and more safely.
• Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective protections or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components is damaged.
• Do not use this machine if the switch does not change between "ON" and "OFF". Any power tool that can not
be controlled with the switch is dangerous and must be repaired.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medication.
• If the machine vibrates in an unusual way stop it, remove the battery and inspect the machine for the possible
cause and repair it. If you can not find the reason, contact GREENCUT Technical Service.
• The machine must be placed horizontally on a stable and levelled surface, without a steep slope.
• Remove all keys or hand tools from the work area before starting this machine.
• Keep your feet firmly on the ground and keep your balance at all times. Sliding or unstable surfaces can cause a
loss of balance and control of the machine.
• Keep all body parts away from the blade. Do not remove the cut material or hold the material to be cut when
the blades are moving.
• Make sure the switch is OFF when clearing jammed material.
• Store the product with the battery disconnected and out of the reach of children.
WORKWEAR
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothes away from moving parts.
Loose clothes, jewellery or long hair can be caught by moving parts. Use:
-
Eye and hearing protection.
-
Long trousers.
-
Head and face protection
-
Hand protection (resistant and non-slip gloves).
-
Foot protection.
• Protective equipment such as a dust mask, safety gloves, non-skid safety boots and a hard hat will reduce the
risk of personal injury.
37
EN