7
11.2 RS827-RS829-RS831-RS833-RS838-RS839
Height adjustment
Press the stop to adjust the seat by removing the barrel and bringing it into correspondence
of the holes according to the desired height and the subjective manoeuvrability of the patient
himself. Reposition the pin on the hole to lock the barrel. Check that all four legs have the
same height. Place the seat on a flat and regular surface. To check seat stability before use.
11.3 RS908
Width adjustment
The frame is width adjustable, to adjust it, remove the connecting bars from the frame and
secure it with the clip to the desired location
Height adjustment
Press the pin to remove the barrel and bring it into correspondence of the holes according to
the desired height. Reposition the retainer on the hole to lock the barrel. Check that all four
legs have the same height.
11.4 RP770
Height adjustment
Press the pin to remove the barrel and bring it into correspondence of the holes according
to the desired height. Reposition the retainer on the hole to lock the barrel. Check that both
legs have the same height.
12. CLEANING AND DISINFECTION
12.1 Cleaning
To clean the aid and the structure use a solution of alcohol and neutral soap (in equal parts)
mixed with water. Do not use abrasive substances, acids, alcohol, chlorine-based cleaners,
disinfectants and acetone when cleaning, because these substances cause the abrasion of the
plastic surfaces and rusting of metal surfaces.
The manufacture company cannot be held responsible for the damage that is caused by using
materials that could damage the product surface or corrosive chemicals during cleaning.
12.2 Disinfection
If you need to disinfect the product use a common disinfectant neutral detergent.
13. CONDITIONS OF DISPOSAL
In case of disposal don't use the inserting container for municipal waste. We recommend to
dispose the bath chair in the appropriate disposal areas for recycling.