4. CHARACTERISTICS OF THE MATERIAL
* Subject to change
Model
Sound level
Drying time
Air speed
infrared sensor
Power
Voltage
Dimensions
Weight
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Risk from electrical current!
• No contact with heat sources must take place with the power cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water in the unit in operation or still hot.
• The device must be connected properly and comply with regulations.
WARNING
By operating the apparatus may reach high temperatures. To avoid burns and accidents, do not use the
machine malfunction and do not use spare parts that do not origins.
ELECTRICAL HAZARD
Risk from electrical current!
In case of improper installation, the device can be dangerous and cause injury. Before installation, check the
power system data. Connect the device only when there is compliance. The unit should be unpacked and
checked fully before connecting by a professional.
5.2 Use
WARNING
The establishment of the installation of the device and maintenance must be performed only by professionals.
• Do not leave the unit without monitor.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
CTAABS
69-73 dB
14 seconds
81 m / s
YES
890 W
230 V
L 233 x D 102 x H 354 mm
3.6 Kg
CTASBS
69-73 dB
14 seconds
81 m / s
YES
890 W
230 V
L 233 x D 102 x H 354 mm
4.5 Kg
FR