Panacom BL-1352HS Manual Del Usuario página 5

1. Connect the USB cable to the USB port on the unit.
2. Connect the other end of the USB cable to a USB port on a PC or an AC/
DC adapter. The LED indicator turns red to indicate that the battery is
being charged. When the battery is fully charged, the red LED indicator will
turn off.
Pairing the Bluetooth headphones with Bluetooth devices (phone or
music device)
1. Turn off the headphones. Make sure the headphones is power off before
going to the next step.
2. Press and hold the Phone button until the red LED light flashes, now the
Bluetooth headphones is ready for pairing.
3. Turn on your Bluetooth enabled device and activate the Bluetooth
function.
4. Search for the Bluetooth device, "BL-1352HS" will show up.
5. Pair your Bluetooth enabled device with BL-1352HS. If a password is
needed, type in "0000". After the BL-1352HS is paired with your device,
connect it to your device.
tips:
Once the headphones is paired and connected to your Bluetooth device, it
automatically connect the next time as long as the Bluetooth on your device
is turned on.
Control a phone call via headphones
Answer a call: Short press the Phone button.
End a call: Short press the Phone button.
Redial the last number: Press the phone button twice quickly.
Pg. 5