König HAV-TRHP20KN Manual De Uso página 3

Step 3:
Insert the antenna into the antenna socket of
the transmitter.
Step 4:
Connect the audio cable of the transmitter, fitted with a 3.5 mm jack plug, to the headphones (audio)
output of an audio providing appliance, like TV, audio equipment, PC, etc.
TV PC
AUDIO
Step 5:
Connect the plug on the AC/DC mains adapter
cable to the DC IN socket at the back of the
transmitter. Then plug the adapter into a wall
outlet.
Note: the power LED will not light up if the
receiver is not receiving an audio signal.
3