MST702
ReveRsible Die gRinDeR
OWNERS MANUAL
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm . Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work . To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles .
Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,000 RPM
HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .5
Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1/2"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .6 lbs .
Collet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4"
MST702
WARNING
SPECIFICATIONS
RPM
RPM
RPM
Average Air Consumption @ 15 Second Run Time . . . 3 .35 CFM
Minimum Hose Size . . . . . . . . . . . . . . . . . . . . . . . 3/8" I .D .
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT
Maximum air pressure . . . . . . . . . . . . . . . . . . . . . . . .90 PSI
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dBA
Vibration Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .2 m/s²
WARNING
RATED RPM OF THE ACCESSORY
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
ALWAYS READ INSTRUCTIONS
BEFORE USING POWER TOOLS
ALWAYS WEAR SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
09/14/15