Running The Initial Setup; Using The Tv Control Stick - Samsung Q9F Serie Manual Del Usuario

06 Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
• Noise may occur temporarily when the TV communicates with mobile devices.
• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.
• To perform initialisation by using the SmartThings app, the mobile device must have been connected via
Wi-Fi.
• When the pop-up for setup does not appear automatically on the SmartThings app of your mobile
device, proceed with the process after manually adding the TV using Add Device on the dashboard of the
SmartThings app.
You can also start the Initial Setup using the TV's menu (
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.

Using the TV Control Stick

You can use the Control Stick on the bottom of the TV instead of the remote control to control most of the
functions of your TV. While watching TV, you can change the channel by pressing the up and down directional
buttons on the Control Stick or adjust the volume by pressing the left and right directional buttons. Press the
on the Control Stick to display the Control menu.
To run an item on the menu, press the directional buttons on the Control Stick to move the focus to the item,
and then press the button on the Control Stick.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached.
Please remove the protective film.
> Settings > General > Start Setup).
Control menu
: Smart Hub
: Settings
: Return
Control Stick / Remote control sensor
• Press button: Display the Control menu. / Select or run
a focused item on the menu.
• Press and hold button: The running function is
terminated.
• Up/Down button: Changes the channel.
• Left/Right button: Changes the volume.
The Control Stick is located on the bottom of the TV.
: Source
: Power off
English - 15