Turntable Operation - Roadstar TTR-8632UCEN Manual De Instrucciones

TURNTABLE OPERATION

Preparation
Open the Record Player Cover.
Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1. Set the Function Selector (7) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (25) to 33 or 45 rpm according to the record.
4. Release the tonearm clamp, and remove the protective cap from the stylus.
5. Lift the Tonearm with the Tonearm Lift Lever.
6. Move the tonearm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
8. When the record is finished the tonearm will automatically stop. Lift the tonearm from
the record and return it to the rest .
9. To stop manually, lift the tonearm from the record and return it to the rest.
10. To select Auto Stop mode, move the Auto Stop Switch (29) to ON position.
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tonearm clamp could result in damage
to the Tonearm. Replace the protective cap on the stylus when not in use.
English
5
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
1.
SONG TITLE/FOLDER NAME SEARCH FUNCTION (BY REMOTE HANDSET)
You can search the track by the title/floder name in disc during Stop mode:
1.
2.
REMARK:
- In case no name had been assigned for the track, " none " or " unknown " is being
- The LCD display supports English language only.
MP3/WMA TRACK FORMAT REQUIREMENT:
-
-
English
6
Press the " INFO " (2) button during playback of MP3/WMA disc, the song title is being
displayed. press the " INFO " button again to disable the function.
Press the " FIND " (1) button once, then press the "skip up" (or skip down) button (7),
you can search the title of each song one by one under alphabet order on Lcd display,
then press the " PLAY/PAUSE " button (6) to start the playback of the selected track.
Press again " FIND " button, the folder name is being displayed. then press the "skip
up" (or skip down) button to select the desired folder, and press the " PLAY/PAUSE"
button (6) to start the playback of all tracks inside that selected folder.
displayed" on the display.
MP3 bit rate : 32 kbps~256 kbps and wma bit rate : 32 kbps ~ 320 kbps
The performance of playing MP3 disc is various from the quality of recording disc and
the method of recording.