LG 32LF585B Guía Rápida De Configuración página 13

finger(s) against it for long periods of time. Doing
so may produce some temporary distortion
effects on the screen.
Preventing image burn or burn-in on
your TV screen
y If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
y If the aspect ratio of the TV is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
y Avoid displaying a fixed image on the TV screen
for a long period of time (2 or more hours for LCD,
1 or more hours for the Plasma TV) to prevent
image burn.
Preparing
NOTE
y Image shown may differ from your TV.
y
y Your TV's OSD (On Screen Display) may differ
y
slightly from that shown in this manual.
y The available menus and options may differ
y
from the input source or product model that you
are using.
y New features may be added to this TV in the
y
future.
y The items supplied with your product may vary
y
depending upon the model.
y Product specifications or contents of this manual
y
may be changed without prior notice due to
upgrade of product functions.
y For an optimal connection, HDMI cables and
y
USB devices should have bezels less than 10 mm
thick and 18 mm width.
y Use an extension cable that supports USB 2.0 if
y
the USB cable or USB flash drive does not fit into
your TV's USB port.
y Use a certified cable with the HDMI logo
y
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
y Recommended HDMI cable types (3m or less)
y
- High-Speed HDMI®/
TM
- High-Speed HDMI®/
TM
CAUTION
y Do not use any unapproved items to ensure the
y
safety and product's lifespan.
y Any damages or injuries by using unapproved
y
items are not covered by the warranty.
y Some models appear to have a thin film on the
y
screen. It is actually part of the screen; do not
remove it.
y When attaching the stand to the TV set, use the
y
correct size screw for your model.
y When attaching the stand to the TV set, place
y
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
y Make sure that the screws are fastened tightly.
y
(If they are not fastened securely enough, the TV
may tilt forward after being installed.)
y Do not tighten the screws with too much force;
y
otherwise they may be damaged and come
loose later.
cable
cable with Ethernet
*A 10 mm
*B 18 mm
5