Admiral AAW-10CR1FHU Manual De Uso Y Mantenimiento página 11

Installation instructions
9. Complete the installation
A. Cut the foam to fit the opening between the top of
the inside and outside window. See (Fig. 13).
B. Some installations may require additional sealing
around the window and air conditioner. Check for any
air leaks and seal where necessary.
C. In very humid areas, the water removal may be
excessive enough to overflow the unit or increase the
noise of the air conditioner. If this occurs, you may wish
to attach a drain hose (not included) to the drain plug
allowing condensations to run off conveniently.
See (Fig. 14).
10
Foam
Fig. 13
Drain Hose
(not included)
Fig. 14