Battery charging
The battery can be charged from the racket or when the racket is
connected to the base.
-
Set the selector (7) to OFF;
o
or
o
-
Connect the other connector of the USB cable to the
detachable supply unit (1).
-
Connect the detachable supply unit (1) to the mains.
While charging, the charging led (9) will be red.
When charging is complete, the charging led (9) will be green.
Full charging time: 3-5 hours.
When charging is complete, disconnect the detachable supply unit
(1) from the mains and disconnect the USB cable (2).
Using as racket
Adjust the selector swtich (7) to set the following operating modes:
OFF
To use the racket:
-
Set the selector switch (7) to "Racket ON" position;
(EN) INSTRUCTIONS FOR USE
connect the USB cable (2) to the USB socket oft he
racket (5),
insert the racket (6) in the base (15) and connect the
USB cable (2) to the USB socket of the base (4).
Racket ON
21 / 64
Racket ON + light
for night use