Using The Controls; Select Signal; Select Temperature; Select Cycle - Admiral AD-2 Guía De Uso Y Cuidado

Using the Controls

STEP 1

Select Signal

End of Cycle Signal
When the cycle is complete, a signal will sound several
times. The End of Cycle Signal volume is adjustable.
To adjust the volume, select any setting between OFF
and HIGH.
STEP 2

Select Temperature

To select the correct temperature, turn the temperature
control to Regular, Perm Press, Delicate, or Air Fluff.
DRYER TEMPS
Sturdy cottons or labels marked
Regular
Tumble Dry.
For permanent press, synthetics,
Perm Press lightweight cottons or items
labeled "Tumble Dry Medium. "
For heat sensitive items labeled
Delicate
Tumble Dry Low.
Items which need freshening.
Air Fluff Load tumbles with room
temperature air.
3
LOAD TYPE
STEP 3

Select Cycle

To select a cycle, rotate the control dial to the desired
setting. When using a Sensor Dry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
Sensor Dry Regular Fabrics
The Sensor Dry Regular Fabrics cycle is designed to
dry most cottons and linens. At the end of the cycle,
the clothes are cooled for approximately 10 minutes to
reduce wrinkling.
Sensor Dry Wrinkle-Free Fabrics
The Sensor Dry Wrinkle-Free Fabrics cycle is designed
to dry wrinkle-free cottons, synthetic fabrics and
permanent press fabrics automatically.
Wrinkle Out is provided to minimize wrinkles in the
Sensor Dry Wrinkle-Free Fabrics cycle. This feature
provides an extra 55 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle. The additional
55 minutes can be cancelled by setting the Wrinkle Out
knob to OFF.