Beper 90.950H Manual De Instrucciones página 10

Electric Kettle Use instructions
HOW TO USE IT ?
Place the kettle on a stand and plane surface.
Remove the kettle (E) from the base (H) and fill it with water, respecting MIN and MAX levels indica-
ted on the water level indicator (D). you can also add water opening the lid (A) or fill it by the pouring
spout (B). Close the lid and put the kettle on the base. Plug the appliance on the socket.
Press switch on/off (F) downwards and the kettle operates. The light indicator (G) lights up. When
the switch and light turn off, water is ready to be used.
Lift the kettle only by the handle (C). The kettle becomes very hot and does be touched directly with
hands.
Disconnect the cord supply form the socket.
CLEANING
- Unplug the appliance from the socket.
- Let the kettle cool down and clean with a damp sponge.
- Do never use abrasive sponge to clean it.
- Clean regularly, at least one a month if the water is had or more if the water is very hard.
To remove lime scale, use:
White wine vinegar 8°:
Fill the kettle with ½ liter of vinegar.
Let it for about one hour without heat it.
Empty the kettle and rinse 5 or 6 times.
Repeat if necessary.
Acid citric:
Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
Empty the kettle and rinse it 5 or 6 times.
Repeat if necessary.
Do not use other methods or detergents to remove lime scale.
In case of :
Use while empty
The kettle is on but without water in or the tartar activates the safety system and block the unit:
let the kettle cool down and fill it with water. Use the switch to turn it on: the kettle start again after
approx. 15 minutes.
10