LevelOne WAP-6002 Guía De Instalación Rápida página 15

3.
I cannot connect to the wireless network.
Check whether the SSID network name and wireless security
are the same on both the client and AP. If you still have
problems, then power off and on your AP and restart your
computer.
Your last solution will be forced to reset the AP to factory
default settings.
Make sure your AP's Power light is not blinking and remains
ON. Then press and hold the WPS and Reset buttons for more
than 10 seconds until you see the Power light blink 2 times,
then release the buttons. The AP is now reset to factory
defaults.
15