Connection Status - Topcom Skyr@cer WBR 254G Manual De Usuario

Topcom Wireless Broadband Router WBR 254G
• Now the setup is complete
- Click Restart to save and restart the router.
• When all settings are saved a new screen will pop up:
- Click Close
• The Setup Wizard is completed !
Remark:
• Next time you go to the router Web page the Setup Wizard will appear again. This can be disabled:
- select No and click update
- now the wizard will not appear again when you access the router Web page.

5. CONNECTION STATUS

The WAN connection can be checked in the Status screen on the router Web page.
For PPPoE connection:
- The connection can be disconnected by clicking Disconnect. You can connect by clicking the Connect key
Topcom Wireless Broadband Router WBR 254G 11