OK. OCR 210 Manual Del Usuario página 33

BEFORE FIRST TIME USE
Remove the product and accessories carefully from the original
packaging. Inspect the delivery contents for completeness
and damages. Should the delivery contents be incomplete or
damaged, contact your sales outlet immediately.
INSTALLATION AND POWER SUPPLy
Installation
For optimal reception, extend the antenna fully and adjust
1
it. Connect the power plug to the mains.
Back up battery
Insert batteries to enable the clock continues operating during
a possible power failure. After the mains power remains, the
correct time will appear on the display.
1. Open the battery compartment.
2. Insert 2 x 1.5 V battery (type LR03/AAA, not included). Make
sure the polarity is correct as indicated.
3. Close the battery compartment.
Note:
Display, radio and alarm will not function during back up
operation.
GENERAL SETTINGS
Time setting
The time can be set only if the radio is in off mode
2
(Standby):
1. Press the SET/PRE/M+ button for at least 1 second. The
2. Set the hours with HOUR/TU- button and minutes with
IM_OCR 210 W_161122_V03_HR.indb 33
time is flashing on the display.
MIN/TU+ button. Confirm the time with SET/PRE/M+.
33
EN
22/11/16 9:53 AM