Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Loudspeaker
Rated Power (RMS)
Maximum Power
Power Taps
Impedance
Sensitivity SPL (1 W / 1 m)
Sound Pressure SPL (6 W / 1 m)
Freq. Range
Cutout Size
Dimension (mm)
Weight
Finish
Colour
Mounting
INSTALLATION GUIDE
Step 1 – Cutout a Ø 92mm circle on the ceiling. Use a cardboard cutout template or a circular cutter set to the required cutout size.
Step 2 – Place the springs on two sides of speaker into the hole.
Step 3 – Push-up "A" point in order to fix one speaker's side.
Step 4 – Push-up "B" point in order to fix the other side to complete the installation.
CEILING SPEAKER
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅
No naked flame sources, such as lighted candles,
should be placed on the apparatus
A-200ATP
2.5" bicone
6 W
8 W
6 W, 3 W, & 1'5 W
1k6 Ω, 3k3 Ω & 6k6 Ω
84 dB
92 dB
130 ~ 20.000 Hz
Ø 92 mm
Ø 100 x 96 (depth)
0,6 kg
ABS, metal grill
White
Springs
A-200ATP
.
Publicidad
