Marmitek Power SE Guía De Instalación Rápida página 2

Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Never connect a power adapter if it's damaged. In
such cases, please contact your supplier.
• Never open the product: the device may contain parts
with deadly voltage.
• Repairs or service should only be performed by
qualified personnel.
• Using damaged or inappropriate lights or fittings
carries the risk of electric shocks.
• Before installation, turn off the mains power and let
lamps cool down before replacement.
Requirements
This light bulb is not suitable for use with conventional
dimmers.
This product requires a stable working Wi-Fi network
(username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Power SE
• Plug the Smart Power plug into the electrical wall
socket.
• The light indicator should start flashing quickly. If it's
not flashing, hold the button for 5-6 seconds until it
begins flashing.
• Launch the Smart me app from your smart phone or
tablet.
• Click on the + (upper right corner) to add a new
device, confirm if the light indicator flashes quickly
and follow the instructions.
• Press Help button during installation for more
information or when installation fails.
Notes for using the product
• After the installation is completed you can control and
configure the Power adapter by using the app.
• After the installation is completed you can control and
configure the light bulb using the app.
• When the light bulb is switched of by the conventional
light switch, it cannot be operated anymore by app,
timers or preprogramed smart scenarios.
• Check our website
www.marmitek.com
details and how to use the Smart me products.
Technical specifications
Power outlets
Max output
IEC plug type F
IEC plug type E
IEC plug type G
IEC plug type J
Max current
IEC plug type F
IEC plug type E
IEC plug type G
IEC plug type J
Wireless technology
Power
Standby power
Dimensions
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Power SE is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at
www.marmitek.com
for more
1x 100-240V socket
3450 Watt
3450 Watt
3000 Watt
2300 Watt
15 A
15 A
13 A
10 A
Wi-Fi 2.4GHz
100-240 VAC 50/60 Hz
< 0.5 Watt
72 x 52 x 35 mm, excl. plug