LG WD-15436RD Manual Del Propietário página 17

H ow to use washer
Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press the
button for that option to view and select other
settings.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the
Cycle Guide for details.
WASH/RINSE
Selects the wash and rinse
temperature combination for the
selected cycle. Press the
WASH/RINSE button repeatedly to
scroll through available settings.
• Your washer features a heating element to
boost the hot water temperature for Extra Hot
settings.
This provides improved wash performance at
normal water heater settings.
• Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
SOIL LEVEL
Adjusts the selected cycle to allow
more time for heavily soiled clothes
or less time for lightly soiled clothes.
CYCLE SETTING BUTTONS
SPIN SPEED
The washer drum spins at up to 1,200 RPM. This
reduces drying time and saves
energy.
Press the SPIN SPEED button to
select the maximum spin speed.
Some fabrics, such as delicates,
require a slower spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain &
Spin cycle to drain the tub and spin clothes; for
example, if you want to remove clothes before
the cycle has ended.
To activate the DRAIN & SPIN cycle:
❶ Press the ON/OFF button to turn on the
washer.
❷ Press the SPIN SPEED button.
❸ Select the desired spin speed.
NOTE: If NO SPIN is selected, the washer will
drain only.
❹ Press the START/PAUSE button.
17