Site Selection - NetSpa CAIMAN Guía De Instalación Y Usuario

3. INSTALLATIoN

3.1. Site selection

WARNING : Before proceed to installation your spa, please make sure that the future
location meets the following conditions :
• A level place
• Wide enough to support the pool and its pump unit.
• Able to support more than 500 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
A place with an awning
3.2. RCD test
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
1. Insert the plug into the
power outlet.
Grounding
You are recommended to use the services of a qualified electrician to ensure that the spa is
electrically grounded by using a copper conductor of at least 2.5 mm² cross
section.
24
The installation and maintenance instructions described in the
following pages are also detailed on the DVD included.
Our installation and maintenance videos are also available on
our website www.netspa.eu.
Clean the place
2. Press the «RESET» button,
the indicator light turns red.
3. Press the «TEST» button,
the indicator light turns off.
A level place
4. Press the «RESET» button,
the indicator light turns red.
The RCD works properly.