Using The Menus - RocketFish RF-SH230 Guia Del Usuario

Resetting your headset
Should your headset stop responding, try plugging it into
the power supply for a few seconds. Your headset should
function again as normal.

Using the menus

To activate the extended menu functions:
• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons
until you hear a series of four ascending beeps.
To return to the main menu:
• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons
until you hear a series of four ascending beeps.
Note: All extended menu function settings will be lost.
Main menu
How to...
Turn the power on.
Turn the power off.
Increase the volume. With the headset on or during a call,
Decrease the volume. With the headset on or during a call,
Enter pairing mode.
Action
With the headset off, press and hold
the multi-function button for three
seconds.
With the headset on, press and hold
the multi-function button for three
seconds.
press the Vol+ button repeatedly.
press the Vol– button repeatedly.
With the headset off, press and hold
the multi-function button for five
seconds. See the pairing instructions
of your mobile phone.
Headset response
Headset turns on and indicator flashes
green.
Indicator flashes green three times
every second for two seconds, then the
headset turns off.
Every press you hear a beep with a
higher volume and higher tone.
Every press you hear a beep with a
lower volume and lower tone
Headset indicator flashes green twice
every second and you will hear a series
of high tones.
RF-SH230 15