21246
PARTS DESCRIPTION
1.
Cover
2.
Baking plate
3.
Base
4.
Indicator light
5.
Spatula (8 pieces)
6.
Dough cutter
7.
Power cord and plug
BEFORE FIRST USE
Clean the cover, baking plate and spatulas before using the appliance for the first time (see "CLEANING AND
MAINTENANCE"). The appliance may emit some smoke and a characteristic smell when you switch it on for the
first time. This is normal, and will stop soon.
OPERATING INSTRUCTIONS
1.
Place the appliance on a flat, stable, heat-resistant and splash-proof surface where it cannot fall.
2.
Do clean the heating element before plugging in.
3.
Plug the power cord into an appropriate electrical outlet to turn on the appliance.
4.
The indicator light turns on when the power is connected. The appliance heats up immediately.
5.
You can use the top surface of the cover to keep warm food.
NOTE: Turn on the appliance 15 minutes before use.
How to bake pizzas:
1. Spray or wipe the spatulas with a non-stick spray or oil for the first pizza.
Place the dough, sauce and all the ingredients in small bowls on the table around the Pizza Oven. You can
bake the pizza on the spatula or directly on the baking plate.
2. Put some flour on the backside of the dough to avoid sticking and place it on the spatula (do not prepare
pizza on your plate and try to slide it onto spatula). Coat with tomato sauce, leaving an edge of about half a
centimetre. Pick your own ingredients and put them on the pizza. Insert the pizza into the deepening of the
baking plate. Coating your pizza with too much ingredients will result in a longer cooking time and
ingredients burning on the baking sheet, be gentle with the amount of toppings!
Note: If you like the dough crispier, you can pre-bake the fresh dough on top of the cover for 2-3 minutes
- 4 -
EN